Rad! Scale Motorsports
  • Home
  • Store
    • Lubricants
    • Decals & Stickers
    • Tools
  • Links
    • Manufacturers
    • Forums and Information
    • Events and Sanctioning Bodies
    • Tracks and Venues
    • Utilities and Tutorials
  • Hints & Tips
    • Getting Started in Slot Car Racing
    • Applying Waterslide Decals
    • Casting Clinic
    • The Complete Future
    • Rocket City Dyno
    • Lane Colors
  • About
    • Shipping
  • Events
    • 2012 HOPRA Nationals
    • 2012 24 Hours of the Katz-Spa-Ring
    • 2012 USRA Div 1 Nationals
    • 2012 Big Shot HO Shootout
    • 2013 Fray in Ferndale
    • 2013 Quarrel
    • 2014 Fray in Ferndale
    • 2015 Fray in Ferndale
  • Formula-K
  • Slot Car Tracks
  • Blog

How to apply waterslide decals

6/18/2012

0 Comments

 
Here's how to apply these:

  • Cut apart the individual images from the sheet.
  • Dip the decal into lukewarm water for 1 or 2 minutes. Take the decal from the water and see if the image will move or slide on the paper backing. If not, return to the water for a few more seconds.
  • Once the decal will slide on the backing, put the decal and backing on a paper towel for a few seconds to remove the excess water.
  • Then bring the decal up to where on the model you want to apply it and slide the image from the paper backing onto the model. While wet, you can still move the image on the model a bit to position it just where you want it. If there are any air bubbles under the decal, gently push the bubble toward one of the edges of the decal with a wet Q-tip or edge of a paper towel to remove it.
  • When the decal is in position, simply let it air dry and it will stay in place.
Many hobby shops will sell various decal setting solutions that will help the decal conform to sharply curved surfaces. Solvaset from Walthers, Micro-Sol and MicroSet from Microscale Industries are examples of decal setting solutions. We suggest trying out the specific solution you wish to use on an unused decal from the same sheet applied to a piece of scrap plastic to make sure the solution will not react with the decal. If you wish to spray a clear coat over your decals, the clear paint you intend on using should be tested first using the same method. Some people use Delta Ceramcoat's clear varnish. Another method of sealing the decals is to dip them in Pledge with Future Shine.

Unused waterslide decals may deteriorate over time due to storage conditions such as heat, moisture or exposure to light. If you have an older kit, you may wish to test one of the decals on the sheet in water to see what kind of condition they're in. Use one of the markings you were not planning on applying to the model or use the small kit number or copyright info markings usually found on the edge of the sheet. If they break up when placed in water, they're getting pretty old. One way around this is to brush on a clear decal film. This is a liquid product made by several companies including Badger, Microscale and others and found in many hobby retailers and online.

One last trick: exposing an older decal sheet that's starting to turn yellow to bright sunlight for an hour or so will usually clear that yellowing right up.


0 Comments



Leave a Reply.

    Author

    Cory White is a motorsports enthusiast of all scales.

    Archives

    September 2013
    March 2013
    June 2012
    May 2012
    April 2012
    March 2012
    February 2012

    Categories

    All
    1/24 Scale
    Armatures
    Chassis
    Commentary
    Community
    Competition
    Dash
    Decals
    Experience
    Focus
    Friendship
    Intensity
    Magnets
    News
    Personalities
    Pickup Shoes
    Preparation
    Racing
    Rumors
    Shoes
    Silicone
    Slot Cars
    The Fray In Ferndale
    Tips
    Tires
    T-Jet
    Video
    Zen

    RSS Feed

Copyright © 2012 - 2024 Rad! Scale Motorsports