Tools
1 oz. Precision Oil Bottle - TU001
This is a one ounce bottle that comes with a cap, precision tip that screws onto the cap, a travel tip that screws onto the cap and a precision tip cover for protection while the bottle is in your tool box. You know... So you don't poke yourself or break the tip off.
|
$4.00 - Choose the tip size you prefer. The higher the gauge number, the smaller the opening.
|
Rad! Power Supply - PS001
The Rad! power supply has six DC voltage settings; 3, 4.5, 6, 7.5, 9 and 12 volts, making it great for breaking in cars at lower voltages, as well as getting those motors spinning fast at the higher voltages.
Using the optional banana to alligator clip power leads, you can clip directly to car pickup shoes, a piece of extra track or the track you run your BSRT G-Jets on. The 2 amps of current will run up to six lanes of G-Jets easily. It's also great for getting all other cars spinning and warmed up. Input: 120 VDC Output: 3, 4.5, 6, 7.5, 9, 12 VDC Current: 2 A Connections: Banana plugs |
$28.00 with power leads, $25.00 without power leads.
|
Pickup Shoe Cleaners - TU002
These pickup shoe cleaners chuck nicely into your Dremel or other rotary tool. They come in a pack of 3, with or without the 1/16" mandrel. They can be installed on the mandrel one or several at a time. For pickup shoes, 3 is recommended.
They are offered in three grades: Pumice (pink) - Very fine. For polishing. 400 Grit (blue) - Fine. For cleaning. 220 Grit (red) - Coarse. For light grinding and dirty pickup shoes. Not only are they great for cleaning and polishing pickup shoes between heats, they work well for fine detail grinding and polishing on bodies, brass when making chassis from scratch and cleaning up corroded or tarnished metal without chemicals or ultrasonic cleaners. |
Set of 3 discs - $4.25.
Set of 3 discs with 1/16" Mandrel - $5.50. |